↑  ←  Описание функции

_viClose

Closes a VISA connection to an Instrument/Device

#include <Visa.au3>
_viClose($h_session)

Параметры

$h_session A VISA session handle (as returned by _viOpen)

Возвращаемое значение

Успех:Returns 0.
Ошибка:Returns -1 if the VISA DLL could not be open or a NON ZERO value representing the VISA error code (see the VISA programmer's guide).
This function always sets @error to 1 in case of error.

Примечания

As for all the VISA functions the VISA libraries must be installed (you can check whether visa32.dll is in {WINDOWS}\system32) and a GPIB card (such as a National Instruments NI PCI-GPIB card or an Agilent 82350B PCI High-Performance GPIB card) must be installed

См. также

_viExecCommand, _viFindGpib, _viGpibBusReset, _viGTL, _viOpen, _viSetAttribute, _viSetTimeout

Пример

;- This assumes that you have instrument set to GPIB address 1
; It shows how to use the _viExecCommand function in stand alone mode and combined
; with _viOpen and _viClose.
; It also shows the _viGTL function

#include <Visa.au3>

Local $h_session = 0

; Query the ID of the instrument in GPIB address 3
MsgBox(4096, "Step 1", "Open the instrument connection with _viOpen")
Local $h_instr = _viOpen("GPIB::3::0")
MsgBox(4096, "Instrument Handle obtained", "$h_instr = " & $h_instr) ; Show the Session Handle
; Query the instrument

MsgBox(4096, "Step 2", "Query the instrument using the VISA instrument handle")
Local $s_answer = _viExecCommand($h_instr, "*IDN?") ; $h_instr is NOT A STRING now!
MsgBox(4096, "GPIB QUERY result", $s_answer) ; Show the answer
; Query again. There is no need to OPEN the link again

MsgBox(4096, "Step 3", "Query again. There is no need to OPEN the link again")
$s_answer = _viExecCommand($h_instr, "*IDN?")
MsgBox(4096, "GPIB QUERY result", $s_answer) ; Show the answer

MsgBox(4096, "Step 4", "Close the instrument connection using _viClose")
_viClose($h_instr) ; Close the instrument connection