Что нового

[Мышь, клавиатура] Блокировка кнопки

Lucky

Новичок
Сообщения
25
Репутация
1
Помогите новичку плз :-[

Купил мышку, а там довольно неудобно расположена кнопка internet, вопрос в том, можно ли как то блокировать нажатие этой кнопки средствами автоита? И как узнать имя конкретно той кнопки?
 

Yashied

Модератор
Команда форума
Глобальный модератор
Сообщения
5 379
Репутация
2 711
Это совсем не тривиальная задача. Намного проще отключить ее в драйвере мыши, который должен был идти в комплекте с ней. Если нет, то скачай его с сайта производителя твоей мыши, и будет тебе счастье.
 
Автор
L

Lucky

Новичок
Сообщения
25
Репутация
1
Для Windows XP драйвер для этой мыши - отсуствует. Как быть?
 

snoitaleR

AutoIT Гуру
Сообщения
854
Репутация
223
Lucky
Я взял с оффсайта скрипт, перехватывающий события от мыши...
Добавил в него вывод кодов "нестандартных" событий...
После того как будет получен код события можно будет блокировать его обработку в Case с помощью выхода из функции Return 0...

Код:
#include <GUIConstantsEx.au3>
#include <StaticConstants.au3>
#include <WindowsConstants.au3>
#include <WinAPI.au3>

;These constants found in the helpfile under Windows Message Codes
;Global Const $WM_MOUSEMOVE = 0x0200 ;mouse move
;Global Const $WM_MOUSEWHEEL = 0x020A ;wheel up/down
;Global Const $WM_LBUTTONDOWN = 0x0201
;Global Const $WM_LBUTTONUP = 0x0202
;Global Const $WM_RBUTTONDOWN = 0x0204
;Global Const $WM_RBUTTONUP = 0x0205
;Global Const $WM_MBUTTONDOWN = 0x0207
;Global Const $WM_MBUTTONUP = 0x0208
Global Const $MSLLHOOKSTRUCT = $tagPOINT & ";dword mouseData;dword flags;dword time;ulong_ptr dwExtraInfo"

Global $currentEvent[2]

Global $iLBUTTONDOWN = 0
Global $iRBUTTONDOWN = 0
Global $iMBUTTONDOWN = 0
Global $LRClickStatus = 0
Global $RLClickStatus = 0
Global $LRDrag = 0
Global $RLDrag = 0
Global $LMDrag = 0
Global $RMDrag = 0
Global $doubleClickTime = 400

#Region ### START Koda GUI section ### Form=
$Form1 = GUICreate("Form1", 633, 447, 192, 124)
$Label1 = GUICtrlCreateLabel("Label1", 200, 8, 228, 49)
GUISetState(@SW_SHOW)

;Register callback
$hKey_Proc = DllCallbackRegister("_Mouse_Proc", "int", "int;ptr;ptr")
$hM_Module = DllCall("kernel32.dll", "hwnd", "GetModuleHandle", "ptr", 0)
$hM_Hook = DllCall("user32.dll", "hwnd", "SetWindowsHookEx", "int", $WH_MOUSE_LL, "ptr", DllCallbackGetPtr($hKey_Proc), "hwnd", $hM_Module[0], "dword", 0)

#EndRegion ### END Koda GUI section ###

While 1
    $nMsg = GUIGetMsg()
    Switch $nMsg
        Case $GUI_EVENT_CLOSE
            OnAutoItExit()
            Exit

    EndSwitch
WEnd


Func _Mouse_Proc($nCode, $wParam, $lParam)
    Local $info, $mouseData, $time, $timeDiff
    If $nCode < 0 Then
        $ret = DllCall("user32.dll", "long", "CallNextHookEx", "hwnd", $hM_Hook[0], _
                "int", $nCode, "ptr", $wParam, "ptr", $lParam)
        Return $ret[0]
    EndIf

    $info = DllStructCreate($MSLLHOOKSTRUCT, $lParam)
    $mouseData = DllStructGetData($info, 3)
    $time = DllStructGetData($info, 5)
    $timeDiff = $time - $currentEvent[1]
    Select
        Case $wParam = $WM_MOUSEMOVE
            ;Test for Drag in here
            If $currentEvent[0] <> "LDrag" Or $currentEvent[0] <> "LRDrag" Or $currentEvent[0] <> "LMDrag" Then
                If $iLBUTTONDOWN = 1 Then
                    $currentEvent[0] = "LDrag"
                    If $iRBUTTONDOWN = 1 Then
                        $currentEvent[0] = "LRDrag"
                        $LRDrag = 2
                    EndIf
                EndIf
            EndIf
            If $currentEvent[0] <> "RDrag" Or $currentEvent[0] <> "RMDrag" Or $currentEvent[0] <> "LRDrag" Then
                If $iRBUTTONDOWN = 1 Then
                    $currentEvent[0] = "RDrag"
                EndIf
            EndIf

            If $currentEvent[0] <> "MDrag" Then
                If $iMBUTTONDOWN = 1 Then
                    $currentEvent[0] = "MDrag"
                    $currentEvent[1] = $time
                EndIf
            EndIf

            If $iRBUTTONDOWN = 1 And $iMBUTTONDOWN = 1 And $currentEvent[0] <> "RMDrag" Then
                $RMDrag = 2
                $currentEvent[0] = "RMDrag"
                $currentEvent[1] = $time
            EndIf

            If $iLBUTTONDOWN = 1 And $iMBUTTONDOWN = 1 And $currentEvent[0] <> "LMDrag" Then
                $LMDrag = 2
                $currentEvent[0] = "LMDrag"
                $currentEvent[1] = $time
            EndIf

        Case $wParam = $WM_MOUSEWHEEL
            If _WinAPI_HiWord($mouseData) > 0 Then
                ;Wheel Up
                $currentEvent[0] = "WheelUp"
                $currentEvent[1] = $time
            Else
                ;Wheel Down
                $currentEvent[0] = "WheelDown"
                $currentEvent[1] = $time
            EndIf


        Case $wParam = $WM_LBUTTONDOWN
            ;Register Button Down, check for Right/Left
            If $currentEvent[0] = "RClick" Then
                $LRClickStatus = 1
            EndIf

            $iLBUTTONDOWN = 1


        Case $wParam = $WM_LBUTTONUP

            ;Update $iLBUTTONDOWN
            $iLBUTTONDOWN = 0
            ;Test for Right/Left Click
            If $RLClickStatus = 1 And ($timeDiff) < $doubleClickTime Then
                $currentEvent[0] = "RLClick"
                $currentEvent[1] = $time
            EndIf
            If $currentEvent[0] = "LClick" And ($timeDiff) < $doubleClickTime Then
                $currentEvent[0] = "LDClick"
                $currentEvent[1] = $time
            EndIf
            ;Test for Drops
            If $currentEvent[0] = "LDrag" Then
                $currentEvent[0] = "LDrop"
                $currentEvent[1] = $time
            EndIf

            If $LRDrag = 2 And $iRBUTTONDOWN = 1 Then
                $LRDrag = 1 ; Denote $LRDrag as still having one button clicked, need to register the drop on RButton up
            EndIf

            If $LRDrag = 1 And $iRBUTTONDOWN = 0 Then
                $currentEvent[0] = "LRDrop"
                $currentEvent[1] = $time
                $LRDrag = 0
            EndIf



            If $LMDrag = 2 And $iMBUTTONDOWN = 1 Then
                $LMDrag = 1 ; Denote $LMDrag as still having one button clicked, need to register the drop on MButton up
            EndIf

            If $LMDrag = 1 And $iMBUTTONDOWN = 0 Then
                $currentEvent[0] = "LMDrop"
                $currentEvent[1] = $time
                $LMDrag = 0
            EndIf

            ;Set LClick if other events haven't fired
            If $currentEvent[1] <> $time Then
                $currentEvent[0] = "LClick"
                $currentEvent[1] = $time
            EndIf

            ;Negate $LRClickStatus
            $RLClickStatus = 0



        Case $wParam = $WM_RBUTTONDOWN
            ;Register Button Down
            If $currentEvent[0] = "LClick" Then
                $RLClickStatus = 1
            EndIf
            $iRBUTTONDOWN = 1


        Case $wParam = $WM_RBUTTONUP
            ;Test for Left, Right, and Right Doubleclick here
            ;Update $iRBUTTONDOWN
            $iRBUTTONDOWN = 0
            ;Test for Right/Left Click
            If $LRClickStatus = 1 And ($timeDiff) < $doubleClickTime Then
                $currentEvent[0] = "LRClick"
                $currentEvent[1] = $time
            EndIf
            If $currentEvent[0] = "RClick" And ($timeDiff) < $doubleClickTime Then
                $currentEvent[0] = "RDClick"
                $currentEvent[1] = $time
            EndIf
            ;Test for Drops
            If $currentEvent[0] = "RDrag" Then
                $currentEvent[0] = "RDrop"
                $currentEvent[1] = $time
            EndIf

            If $LRDrag = 2 And $iLBUTTONDOWN = 1 Then
                $LRDrag = 1 ; Denote $LRDrag as still having one button clicked, need to register the drop on RButton up
            EndIf

            If $LRDrag = 1 And $iLBUTTONDOWN = 0 Then
                $currentEvent[0] = "LRDrop"
                $currentEvent[1] = $time
                $LRDrag = 0
            EndIf



            If $RMDrag = 2 And $iMBUTTONDOWN = 1 Then
                $RMDrag = 1 ; Denote $LMDrag as still having one button clicked, need to register the drop on MButton up
            EndIf

            If $RMDrag = 1 And $iMBUTTONDOWN = 0 Then
                $currentEvent[0] = "RMDrop"
                $currentEvent[1] = $time
                $RMDrag = 0
            EndIf

            ;Set LClick if other events haven't fired
            If $currentEvent[1] <> $time Then
                $currentEvent[0] = "RClick"
                $currentEvent[1] = $time
            EndIf

            ;Negate $LRClickStatus
            $LRClickStatus = 0


        Case $wParam = $WM_MBUTTONDOWN
            ;Register Button Down
            $iMBUTTONDOWN = 1

        Case $wParam = $WM_MBUTTONUP
            ;Test for Middle Double Click here
            ;Update $iRBUTTONDOWN
            $iMBUTTONDOWN = 0
            ;Test for Right/Left Click
            If $currentEvent[0] = "MClick" And ($timeDiff) < $doubleClickTime Then
                $currentEvent[0] = "MDClick"
                $currentEvent[1] = $time
            EndIf
            ;Test for Drops
            If $currentEvent[0] = "MDrag" Then
                $currentEvent[0] = "MDrop"
                $currentEvent[1] = $time
            EndIf

            If $LMDrag = 2 And $iLBUTTONDOWN = 1 Then
                $LMDrag = 1 ; Denote $LRDrag as still having one button clicked, need to register the drop on RButton up
            EndIf

            If $LMDrag = 1 And $iLBUTTONDOWN = 0 Then
                $currentEvent[0] = "LMDrop"
                $currentEvent[1] = $time
                $LMDrag = 0
            EndIf



            If $RMDrag = 2 And $iRBUTTONDOWN = 1 Then
                $RMDrag = 1 ; Denote $LMDrag as still having one button clicked, need to register the drop on MButton up
            EndIf

            If $RMDrag = 1 And $iRBUTTONDOWN = 0 Then
                $currentEvent[0] = "RMDrop"
                $currentEvent[1] = $time
                $RMDrag = 0
            EndIf

            ;Set MClick if other events haven't fired
            If $currentEvent[1] <> $time Then
                $currentEvent[0] = "MClick"
                $currentEvent[1] = $time
            EndIf
        Case Else
         $currentEvent[0] = $wParam
    EndSelect
    GUICtrlSetData($Label1, $currentEvent[0] & @CRLF & $currentEvent[1])

    $ret = DllCall("user32.dll", "long", "CallNextHookEx", "hwnd", $hM_Hook[0], _
            "int", $nCode, "ptr", $wParam, "ptr", $lParam)
    Return $ret[0]
EndFunc   ;==>_Mouse_Proc

Func OnAutoItExit()
    DllCall("user32.dll", "int", "UnhookWindowsHookEx", "hwnd", $hM_Hook[0])
    $hM_Hook[0] = 0
    DllCallbackFree($hKey_Proc)
    $hKey_Proc = 0
EndFunc   ;==>OnAutoItExit
 
Верх